_The Nicol Prism with Perpendicular Ends._--The terminal surfaces
in this prism are perpendicular to the long axis, and the sectional
cut makes with them an angle of about 75 deg.. The length of the prism is
3.75 times its breadth, and if the cement has an index of refraction
of 1.525, the field is symmetrically disposed, and includes an angle
of 27 deg.. Prisms of this kind have been manufactured by Dr. Steeg, Mr.
C.D. Ahrens, and others.
4. _The Foucault Prism_ (_Comptes Rendus_, 1857, xlv., 238).--This
construction differs from all those hitherto mentioned, in that a film
of air is employed between the two cut surfaces as the totally
reflecting medium instead of a layer of cement. The two halves of the
prism are kept in position, without touching each other, by means of
the mounting. The length of the prism is in this way much reduced, and
amounts to only 1.528 times its breadth. The end surfaces are cleavage
planes, and the sectional cut makes with them an angle of 59 deg.. The
field, however, includes not more than about 8 deg., so that this prism
can be used only in the case of nearly parallel rays; and in addition
to this the pictures which may be seen through it are to some extent
veiled and indistinct, owing to repeated internal reflection.
5. _The Hartnack Prism_ (_Ann. de Ch. et de Physique_, ser. iv., vii.,
181).--This form of prism was devised in 1866 by MM.
Pages:
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127